This store requires javascript to be enabled for some features to work correctly.

Modlite ModButton™ Lite (Dual Lead)

  • $149.00
MBL2-BLK-SF/CR-4.5
Cable Length
Color

ModButton Lite is a smaller, lighter-weight cousin to the original ModButton. The switch features the same momentary only activation as the original ModButton. It also features the same high power cable and switch from ModButton but in a slightly smaller package without the integrated mount. 

The laser plug is compatible with PEQ15, DBAL, BE Meyers® MAWL and Wilcox® RAIDx lasers ONLY. 

The Dual Lead variant is our same Modbutton Lite, but has both a Surefire®/Modlite and Crane Laser lead. This Modbutton Lite activates both leads simultaneously, allowing for an excellent vis override functionality of both white light and visible laser. There is no way to select a single lead for activation. For that, we recommend the Unity TAPS SNYC. Available here.


ModButton Lite utilizes a patented Unity Tactical design which supports power delivery needed by the next generation of high output weapon lights like Modlite. A Unity-built Surefire® compatible cable lead allows ModButton Lite to be backwardly compatible with all Surefire®, Arisaka, and Modlite Scout bodies as well as Surefire UE and DS00 tail caps. If constant on is a requirement we recommend using a SF DS00 tail cap which can be found here.

One problem that exists today is older legacy switches are not able to pass the current needed to run current and future generation lights. These older switch designs do not allow Modlite light heads to run at full power. Typically these switches reduce output by 15-20%. ModButton Lite utilizes an updated plug design as well as improved electronics that allow the ModButton Lite to output at full power so all the lumens and candela can be put to good use.

The package includes the switch PIC mounting rails and mounting hardware only no tail cap is supplied. We recommend the Surefire UE or DS00 tailcap which can be found here. Additionally, an adapter is also available for MLOK rails here.

Note: For most setups the 4.5in variant is enough cable to reach the device from the top rail.

Install torque for rail grabber bolts is 5 Inch-lbs

Made in the USA

Weight: 1.8oz
Dimensions: 1.0 × 3.8 × 5.7 in
Mounting Side: Left or Right
Color: Black or Tan