Sale
  • Modlite FDE SCOUT PLHv2-18650 Light Package
  • Modlite FDE SCOUT PLHv2-18650 Light Package
  • Modlite FDE SCOUT PLHv2-18650 Light Package

Modlite FDE SCOUT PLHv2-18650 Light Package

Sorry, currently out of stock

Click here to be notified by email when Modlite FDE SCOUT PLHv2-18650 Light Package becomes available.

This is a one time run with all packages containing the original Gen1 light heads and once these are gone you will not see any additional FDE Gen1 PLHv2 light packages. We also currently have NO plans to offer FDE in Gen2 heads in 2020.

“FDE” references a spectrum of colors that include tan, brown, bronze, earth, and everything in between. Due to the chemical process that takes place during Type III Hardcoat, the final finish can vary from part to part (even parts done in the same batch). Your “FDE” product may vary from other parts from Modlite and other companies, and may vary from the photos shown online.


This light package contains a PLHv2-light head, 18650 body and tail cap. It also includes two KeepPower 3500mAh 18650 batteries and a Nitecore D2 charger. While lumen output with this light is similar to the Surefire® M600DF head the throw is much better suited to a rifle mounted application at more than three times the amount throw than the M600DF. This light is a large step forward from the PLHv1 light. Lumen output is about the same but throw is greatly improved. Is is the best balance of flood and throw available.

If you're looking for the best overall output and throw this is the package you want. We also offer the same light in a shorter package with our 18350 body.

Features

  • Cool White 5700K emitter tint
  • Made and assembled in the USA
  • Drivers are fully potted and tested to withstand select fire SCAR 17 recoil.
  • Lifetime guarantee
  • Approximately 1350 out the front lumens and candela is approximately 54,000. It is an excellent overall light head good for indoor or outdoor use.
  • 6061 Series Alum bezel with Mil-Spec Hard Anodizing.
  • Ultra clear BOROFLOAT® lens allows 98-99% light transmittance.

Dimensions

  • Length w/ Clicky tailcap: 5 1/2" / 140mm
  • Head Diameter: 1 3/16" / 30.16mm
  • Weight: 5.4oz (w/ tail cap and battery)

Lithium CR123 cells are not supported and if used will cause the cells to heat up and possibly explode or catch fire. We recommend the KeepPower 18650 high drain cells which can be found here. Runtime is about 75 minutes with the supplied 18650 cells. 

Beam comparison shots are available in the product images above.

If you have question about batteries please check out our FAQ section about batteries here.